Circular logo with stylized G and arrow, green gradient ring

Coming Soon

FIND THE REAL PROBLEM. GET A LASTING SOLUTION.

ADVANCED IRRIGATION TROUBLESHOOTING


Different irrigation failures can create the same symptoms. We test the system, isolate the actual cause, and explain the right repair before work begins.

Schedule a Diagnostic

START WITH WHAT THE SYSTEM IS DOING

What Symptoms Are You Seeing?

You do not need to know the cause. Tell us what you see, hear, or notice—we will test to find out why.

A Zone Will Not Run

No water, no response, or only part of the zone is operating.

A Zone Will Not Shut Off

Water keeps running after the controller says the zone is off.

Low Pressure or Weak Coverage

Weak spray, poor rotation, dry areas, or inconsistent coverage.

Wet or Muddy Areas

Standing water, soft ground, erosion, or an unexplained bill.

Controller or Wiring Problems

Error messages, lost programs, dead stations, or intermittent use.

Pump or Water-Source Problems

No prime, cycling, low flow, or failure to deliver water.

A SYSTEMATIC, WHOLE-SYSTEM CHECK

What an Irrigation Diagnostic Includes

A diagnostic is more than turning on one zone. We follow the system from the controller and water source to the field components, using the tests that fit the symptoms and the type of system.


✓ Review the symptoms, system history, and visible damage.

✓ Run each accessible zone and observe how the system performs.

✓ Test controller output, station wiring, connections, and solenoids.

✓ Check valves, pressure, flow, sprinkler heads, and coverage.

✓ Evaluate signs of visible or underground leakage.

✓ Inspect pump, well, or lake-fed components when applicable.

The testing plan is tailored to the reported problem.

Not every system requires every test, but every recommendation should have a reason.

THE GOODEN DIAGNOSTIC PROCESS

We Don’t Guess. We Diagnose.

Each step narrows the possibilities until the actual failure is identified.

Listen & Review

Discuss the symptoms, history, and priorities.

Run the System

Operate accessible zones and observe performance.

Test & Trace

Check the components connected to the symptom.

Isolate the Cause

Separate the symptom from the actual failure.

Explain the Options

Review the findings and recommended repair.

THE GOAL IS CONFIDENCE BEFORE REPAIR

You should understand what failed, why the repair is recommended, and what happens next.

WHY TESTING MATTERS

The Same Symptom Can Have Different Causes

Replacing the first visible part may not solve the problem. These are examples of what may be behind a symptom.

Zone Will Not Start

POSSIBLE ROOT CAUSES

  • No controller output or incorrect programming

  • Damaged control wire or failed connection

  • Failed solenoid, stuck valve, or water shutoff

A Zone Will Not Shut Off

POSSIBLE ROOT CAUSES

  • Debris or damage inside the valve

  • Failed diaphragm or solenoid problem

  • Continuous signal from controller or wiring

Low Pressure or Weak Coverage

POSSIBLE ROOT CAUSES

  • Hidden leak, restriction, or partly closed valve

  • Pump or water-source performance problem

  • Clogged nozzle, damaged head, or excess demand

Wet Area or High Water Use

POSSIBLE ROOT CAUSES

  • Cracked fitting, pipe break, or leaking valve

  • Damaged sprinkler head or lateral line

  • Mainline leak or zone that is not closing fully

Controller or Electrical Trouble

POSSIBLE ROOT CAUSES

  • Power, programming, transformer, or module issue

  • Rain sensor or accessory interruption

  • Field-wire short, open circuit, or bad connection

Pump, Well, or Lake-System Trouble

POSSIBLE ROOT CAUSES

  • Electrical feed, pressure control, or loss of prime

  • Intake restriction or water-source problem

  • Pump damage or a failed supporting component

CLEAR ANSWERS BEFORE WORK BEGINS

What Happens After the Diagnostic?

The diagnostic gives you a clear path forward, not a surprise repair.

Clear Findings

We explain what failed, what was tested, and how the failure affects the rest of the system.

Repair Options

You receive the recommended repair, available alternatives when practical, and a clear order of priority.

Approval & Verification

Repair work begins after approval. When completed, the affected system is operated and checked again.

No unnecessary replacements. No vague explanation. No repair without your approval.

WHY PROPERTY OWNERS CALL GOODEN IRRIGATION

Veteran-Owned

Detailed Testing

Residential & Commercial

Clear Recommendations

DIAGNOSTIC QUESTIONS

What Customers Often Ask Before Scheduling

STOP CHASING THE SYMPTOM

Schedule an Irrigation Diagnostic